DATE: 09-08-2025 – TIME: 3:00
Just a brief note to say that I was able to finish off the priming of the skins and remaining fuselage parts that I had not been able to prime previously.
Here are a few pics of what the skins and parts look like once primed. The primer I used, P60G2, flashes off and hardens very quickly so there isn’t any need to leave the parts lying around to “dry”. Within minutes they can be laid on top of each other without fear of getting stuck together or ruining the primer coat.
I used almost a gallon of the primer to prime all of the fuselage kit components.
