Closing Up The RV-10 Rudder
DATE: 10-05-2024 TIME: 0:40 After completing the priming of the horizontal stabilizer components with Sherwin Williams P60G2 I went back to closing […]
Horizontal Stabilizer Continued
DATE: 10/05/2024 TIME: 6:00 Today began with finishing off double checking the rear spar countersinking because I found one hole that was […]
Horizontal Stabilizer Continued
DATE: 10/04/2024 TIME: 4:30 As of this morning, all the prep on the horizontal stabilizer is complete but I decided to go […]
Horizontal Stabilizer Continued
DATE: 10/03/2024 TIME: 5:00 I had to wait for the additional clecos to arrive before continuing with the final size drilling of […]
Horizontal Stabilizer Continuation
DATE: 09/28/2024 TIME: 1:00 Today I spent about an hour using a soldering iron, on which I had ground the tip to […]
Starting Elevator – Section 9
DATE: 09-27-2024 TIME: 0:30 Well, we ran out of silver cleco fasteners so picked up the elevator section and started by stripping […]
Horizontal Stabilizer Continued
DATE: 09-27-2024 TIME: 4:30 I was away this past weekend at the Zenith Aircraft Open Hangar Days in Mexico, Missouri and then […]
Tools And Stuff Intro
At some point in the future I will explain my initial tool purchases and why I made those decisions. Also in this […]
Making New HS-1008 Left & Right
DATE: 09-18-2024 TIME: 1:00 We made the HS-1008 left and right pieces from the aluminum angle that came with the kit and […]
Horizontal Stabilizer Continued
DATE: 09-17-2024 TIME: 3:00 Today I continued with the horizontal stabilizer process by making the 4 cradles suggested on page 8-7 figure […]